|
Connect Electronics SA |
|---|
1.8M Mast to suit DT14ATPMBKE Features: 25mm diameter mast Pre galvanised steel For use with DT14ATPMBKE Universal Kit
2.4M Mast to suit DT14ATPMBKE Features: 25mm diameter mast Pre galvanised steel For use with DT14ATPMBKE Universal Kit
Universal Tin/Tile Adjustable Roof Mount Features: Strong non-penetrating tin and tile roof mount No drilling or cutting of tiles required Includes 2 x extendable stay bars (1.11M - 1.90M) All screws and mounting hardward supplied Pair with a mast available seperately
Tripod Roof Mount - Iron Galvanised Features: Includes 1.2M pre-galvanised mast 25mm mast diameter Hot dip galvanised mounting plate For tin roof installation only
FTA 1.8M Antenna Gutter Mount - Galvanised Features: 25mm diameter mast Hot dip galvanised steel 10mm Heavy Duty Base plate
2 Piece FTA 1.8M Antenna Gutter Mount - Galvanised Features: 25mm diameter mast Pre galvanised mast and hot dip galvanised foot
Portable Satellite Tripod Ground Mount Features: 44mm diameter mast included Pre-galvanised steel- Heavy Duty Powder Coating. Suits 65 - 80cm satellite dishes Includes leveling bubble Rubber feet Holes throgh feet allowing pegging down All legs individually adjustable
Flexi Mount Tin Roof Heavy Duty is a Foxtel approved 65cm and 80cm satellite dish mount for tile roof applications with timber framed roof structures. It is used for mounting and aiming a satellite dish in domestic and commercial applications.
The gutter mount mount is suitable for all domestic installations. It is the perfect solution for installers who are not able to mount a satellite directly on the roof due to safety reasons. Designed to be an easily installed mount using only a ladder at the edge of the roof, making it a safer install option For use with a timber framed roof and can cope with differences in...
1.5M Mast Extension - Galvanised Features: 25mm diameter mast Features 2 x welded on V blocks Includes 2 x U bolts Fix to an existing mast
1160 - 2000mm Extendable Staybars Extendable - adjust and fix to your desired length Pre-galvanised
The galvanised guy cleat is for use as an anchor point on tin rooves for guy wire applications. It is an essential purchase when erecting tall masting or telomast products.
Guywire is perfect for domestic applications where a mast needs to be braced and supported. It is a 180m coil made up of 7 strands of galvanised wire, each 0.90mm. Is suitable for bracing tall DIY masts with FTA digital TV antennas mount upon them.
6mm 1/4" Turnbuckle is used at the anchor point of guywire to adjust the tension of the wire as required.
6mm Guy Wire Thimble (12-Pack) is used to assist with tying off guywire at the end of a guy plate. It aids in preventing the guywire from breaking against the edge of the guy plate.
Patented double rolled edge. Galvanised steel reflector. Charcoal colour, powder coat finish. Stainless steel hardware. Az/EI mount type with 360° Azimuth Alignment. 40mm LNB clamp included. Compatible with Foxtel. Now available with quick release detachable LNB arm for portable use. Reflector: Offset Aperture Efficiency: >80% Horizontal Axis: 80.1cm Vertical Axis:...
